{"title":"Tempering Valve","description":"\u003cp\u003eTempering valves are used in electric, solar, gas hot water heaters and heat pumps by mixing the cold and hot water inputs to output a steady 50 deg hot water.\u003c\/p\u003e","products":[{"product_id":"avg-tva15c-lf-15mm-standard-yellow-cap-tempering-mix-valve","title":"AVG TVA15C-LF 15mm Standard Yellow Cap Tempering Mix Valve","description":"\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eAVG TVA15C-LF standard tempering valve has BSP 15mm 1\/2\" compression fittings at all three ends and features copper olives. Australian Watermark Approved with License No. 20137. AVG identifies standard tempering valves with a yellow cap. The AVG tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eThe AVG TVA15C-LF tempering valve can automatically mix the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the AVG TVA15C-LF tempering valve can be adjusted between 40-50 deg.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Australian Valve Group (AVG)\u003c\/li\u003e\n\u003cli\u003eModel: TVA15C-LF\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Compression with Copper Olives (15C x 15C x 15C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 85 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 40-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003ePressure Supply Differential: 2:1 Maximum\u003c\/li\u003e\n\u003cli\u003eMaximum Permitted Pressure Variation: ±10%\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Systems, Instantaneous Heaters, Heat Pumps, Ring Main Circulation, Standard Hot Water Heaters\u003c\/li\u003e\n\u003cli\u003eSKU: AVG-TVA15C-LF\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAVG TVA15C-LF Tempering Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 670g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AVG","offers":[{"title":"Default Title","offer_id":37392827646120,"sku":"AVG-TVA15C-LF","price":67.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250814124851.jpg?v=1755139961"},{"product_id":"avg-tva20c-lf-20mm-standard-yellow-cap-tempering-mix-valve","title":"AVG TVA20C-LF 20mm Standard Yellow Cap Tempering Mix Valve","description":"\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eAVG TVA20C-LF standard tempering valve has BSP 20mm 3\/4\" compression fittings at all three ends and features copper olives. Australian Watermark Approved with License No. 20137. AVG identifies standard tempering valves with a yellow cap. The AVG tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe AVG TVA20C-LF tempering valve can automatically mix the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the AVG TVA20C-LF tempering valve can be adjusted between 40-50 deg.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Australian Valve Group (AVG)\u003c\/li\u003e\n\u003cli\u003eModel: TVA20C-LF\u003c\/li\u003e\n\u003cli\u003eThread Size: 3\/4\" (20mm) BSP Compression with Copper Olives (20C x 20C x 20C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 26.441mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 85 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 40-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003ePressure Supply Differential: 2:1 Maximum\u003c\/li\u003e\n\u003cli\u003eMaximum Permitted Pressure Variation: ±10%\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Systems, Instantaneous Heaters, Heat Pumps, Ring Main Circulation, Standard Hot Water Heaters\u003c\/li\u003e\n\u003cli\u003eSKU: AVG-TVA20C-LF\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAVG TVA20C-LF Tempering Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 900g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AVG","offers":[{"title":"Default Title","offer_id":37392967794856,"sku":"AVG-TVA20C-LF","price":86.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250814124813.jpg?v=1755152142"},{"product_id":"avg-tva15chp-lf-15mm-solar-rated-high-performance-tempering-mix-valve","title":"AVG TVA15CHP-LF 15mm Solar Rated High Performance Tempering Mix Valve","description":"\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eAVG TVA15CHP-LF high performance solar-rated tempering valve has BSP 15mm 1\/2\" compression fittings at all three ends and features copper olives. Australian Watermark Approved with License No. 20137. AVG identifies high-performance tempering valves with an orange cap. The AVG tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eThe AVG TVA15CHP-LF tempering valve is ideal for high temperature and high performance hot water systems, including solar hot water systems, instantaneous heaters, and pumped ring main distribution systems. It automatically mixes the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the AVG TVA15CHP-LF tempering valve can be adjusted between 40-50 deg.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Australian Valve Group (AVG)\u003c\/li\u003e\n\u003cli\u003eModel: TVA15CHP-LF\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Compression with Copper Olives (15C x 15C x 15C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 40-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003ePressure Supply Differential: 2:1 Maximum\u003c\/li\u003e\n\u003cli\u003eMaximum Permitted Pressure Variation: ±10%\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Systems, Instantaneous Heaters, Heat Pumps, Ring Main Circulation, Standard Hot Water Heaters\u003c\/li\u003e\n\u003cli\u003eSKU: AVG-TVA15CHP-LF\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAVG TVA15CHP-LF Tempering Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 680g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AVG","offers":[{"title":"Default Title","offer_id":37399793959080,"sku":"AVG-TVA15CHP-LF","price":88.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250814113212_c09f0866-84b1-45d9-b15e-30a8b13b0ba2.jpg?v=1755152133"},{"product_id":"avg-tva20chp-20mm-solar-rated-high-performance-tempering-mix-valve","title":"AVG TVA20CHP-LF 20mm Solar Rated High Performance Tempering Mix Valve","description":"\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eAVG TVA20CHP-LF high performance solar-rated tempering valve has BSP 20mm 3\/4\" compression fittings at all three ends and features copper olives. Australian Watermark Approved with License No. 20137. AVG identifies high-performance tempering valves with an orange cap. The AVG tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe AVG TVA20CHP-LF tempering valve is ideal for high temperature and high performance hot water systems, including solar hot water systems, instantaneous heaters, and pumped ring main distribution systems. It automatically mixes the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the AVG TVA20CHP-LF tempering valve can be adjusted between 40-50 deg.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Australian Valve Group (AVG)\u003c\/li\u003e\n\u003cli\u003eModel: TVA20CHP-LF\u003c\/li\u003e\n\u003cli\u003eThread Size: 3\/4\" (20mm) BSP Compression with Copper Olives (20C x 20C x 20C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 26.441mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 40-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003ePressure Supply Differential: 2:1 Maximum\u003c\/li\u003e\n\u003cli\u003eMaximum Permitted Pressure Variation: ±10%\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Systems, Instantaneous Heaters, Heat Pumps, Ring Main Circulation, Standard Hot Water Heaters\u003c\/li\u003e\n\u003cli\u003eSKU: AVG-TVA20CHP-LF\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAVG TVA20CHP-LF Tempering Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 900g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AVG","offers":[{"title":"Default Title","offer_id":37399856513192,"sku":"AVG-TVA20CHP-LF","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250814120056.jpg?v=1755136894"},{"product_id":"avg-tva20hf-lf-20mm-hi-flo-commercial-tempering-mix-valve","title":"AVG TVA20HF-LF 20mm HI-FLO Commercial Tempering Mix Valve","description":"\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eAVG TVA20HF-LF HI-FLOW commercial tempering valve has BSP 20mm 3\/4\" compression fittings at all three ends and features copper olives. Australian Watermark Approved. The tempering valve's higher flow rate valve allows for increased flow at lower inlet pressures. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe TVA20HF-LF tempering valve can automatically mix the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The commercial tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the tempering valve can be adjusted between 40-50 deg.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Australian Valve Group (AVG)\u003c\/li\u003e\n\u003cli\u003eModel: TVA20HF-LF\u003c\/li\u003e\n\u003cli\u003eThread Size: 3\/4\" (20mm) BSP Compression with Copper Olives (20C x 20C x 20C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 26.441mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 85 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 40-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003ePressure Supply Differential: 2:1 Maximum\u003c\/li\u003e\n\u003cli\u003eMaximum Permitted Pressure Variation: ±10%\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Commercial use where more flow is required at lower pressures.\u003c\/li\u003e\n\u003cli\u003eSKU: AVG-TVA20HF-LF\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAVG TVA20HF-LF Commercial Tempering Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 2000g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AVG","offers":[{"title":"Default Title","offer_id":39306526621864,"sku":"AVG-TVA20HF-LF","price":381.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250826151658.jpg?v=1756185758"},{"product_id":"avg-tva25hf-lf-25mm-hi-flo-commercial-tempering-mix-valve","title":"AVG TVA25HF-LF 25mm HI-FLO Commercial Tempering Mix Valve","description":"\u003cdiv\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eAVG TVA25HF-LF HI-FLOW commercial tempering valve has BSP 25mm 1\" compression fittings at all three ends and features copper olives. Australian Watermark Approved. The tempering valve's higher flow rate valve allows for increased flow at lower inlet pressures.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eThe TVA25HF-LF tempering valve can automatically mix the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The commercial tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the tempering valve can be adjusted between 40-50 deg.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Australian Valve Group (AVG)\u003c\/li\u003e\n\u003cli\u003eModel: TVA25HF-LF\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\" (25mm) BSP Compression with Copper Olives (25C x 25C x 25C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 33.249mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 85 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 40-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1000Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003ePressure Supply Differential: 2:1 Maximum\u003c\/li\u003e\n\u003cli\u003eMaximum Permitted Pressure Variation: ±10%\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Commercial use where more flow is required at lower pressures.\u003c\/li\u003e\n\u003cli\u003eSKU: AVG-TVA25HF-LF\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAVG TVA25HF-LF Commercial Tempering Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 2500g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"AVG","offers":[{"title":"Default Title","offer_id":39306526785704,"sku":"AVG-TVA25HF-LF","price":422.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250826151813.jpg?v=1756187090"},{"product_id":"avg-tcv20-20mm-temperature-control-valve","title":"AVG TCV20 20mm Temperature Control Valve (65°C Tempering Mix Valve)","description":"\u003ch4\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan size=\"4\"\u003eOverview\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan size=\"4\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cdiv\u003eAVG TCV20 Temperature Control Valve is Australian Watermark Approved and has BSP 20mm 3\/4\" compression fittings at all three ends and features copper olives. The temperature control valve can automatically mix the cold and hot water inputs and outputs a steady 65 deg hot water after mixing as a factory default setting. The output temperature of the temperature control valve can be adjusted between 50-65 deg. If required to be used as a safety valve the TCV must be commissioned on site to no more than 50\u003cspan\u003e°C\u003c\/span\u003e by a licensed plumber as per AS3500. \u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Australian Valve Group (AVG)\u003c\/li\u003e\n\u003cli\u003eModel: TCV20\u003c\/li\u003e\n\u003cli\u003eThread Size: 3\/4\" (20mm) BSP Compression with Copper Olives (20C x 20C x 20C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 26.441mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 50-65 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 65 deg \u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS13757.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1600Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003ePressure Supply Differential: 2:1 Maximum\u003c\/li\u003e\n\u003cli\u003eMaximum Permitted Pressure Variation: ±10%\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eMaximum Flow Rate: 27L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Hot water tempering\/mixing applications at 65 degrees\u003c\/li\u003e\n\u003cli\u003eSKU: AVG-TCV20\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAVG TCV20 Temperature Control Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 860g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cu\u003e\u003cspan size=\"4\"\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AVG","offers":[{"title":"Default Title","offer_id":39306560045224,"sku":"AVG-TCV20","price":172.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250826112416.jpg?v=1756172530"},{"product_id":"caleffi-252212hp-15mm-solar-rated-high-performance-tempering-mix-valve","title":"CALEFFI 252212HP 15mm Solar Rated High Performance Tempering Mix Valve","description":"\u003cdiv\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eCALEFFI 252212HP high performance solar-rated tempering valve has BSP 15mm 1\/2\" male compression threads at all three ends. Australian Watermark Approved and made in Italy. Caleffi identifies high-performance tempering valves with a yellow cap. The Caleffi tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe CALEFFI 252212HP tempering valve is ideal for high temperature and high performance hot water systems, including solar hot water systems, instantaneous heaters, and pumped ring main distribution systems. It automatically mixes the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the CALEFFI 252212HP tempering valve can be adjusted between 35-50 deg.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Caleffi\u003c\/li\u003e\n\u003cli\u003eModel: Yellow Cap Solar, 252212HP\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Male Compression Thread (15C x 15C x 15C) - Olives\/cone nuts not supplied\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 100 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 35-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMaximum Unbalanced dynamic supply: 6:1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Systems, Instantaneous Heaters, Heat Pumps, Ring Main Circulation, Standard Hot Water Heaters\u003c\/li\u003e\n\u003cli\u003eSKU: 252212HP\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCALEFFI 252212HP Solar 15mm tempering valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 560g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Caleffi","offers":[{"title":"Default Title","offer_id":39482947338408,"sku":"252212HP","price":155.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250816143653.jpg?v=1755319708"},{"product_id":"caleffi-521319-15mm-standard-tempering-mix-valve","title":"CALEFFI 521312 15mm Standard Tempering Mix Valve","description":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eCALEFFI 521312 standard tempering valve has BSP 15mm 1\/2\" male compression threads at all three ends. Australian Watermark Approved and made in Italy. Caleffi identifies standard tempering valves with a grey cap. The Caleffi tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe CALEFFI 521312 tempering valve can automatically mix the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the CALEFFI 521312 tempering valve can be adjusted between 35-50 deg.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Caleffi\u003c\/li\u003e\n\u003cli\u003eModel: Grey Cap Standard, 521312\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Male Compression Thread (15C x 15C x 15C) - Olives\/cone nuts not supplied\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 85 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 35-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMaximum Unbalanced dynamic supply: 6:1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Systems, Instantaneous Heaters, Heat Pumps, Ring Main Circulation, Standard Hot Water Heaters\u003c\/li\u003e\n\u003cli\u003eSKU: 521312\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCALEFFI 521312 Standard 15mm tempering valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 560g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Caleffi","offers":[{"title":"Default Title","offer_id":39482947829928,"sku":"521312","price":132.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250816143645_c2a39794-ff7a-4630-ba76-5d440c1a2abb.jpg?v=1755322283"},{"product_id":"caleffi-252219hp-20mm-solar-rated-high-performance-tempering-mix-valve","title":"CALEFFI 252219HP 20mm Solar Rated High Performance Tempering Mix Valve","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eCALEFFI 252219HP high performance solar-rated tempering valve has BSP 20mm 3\/4\" male compression threads at all three ends. Australian Watermark Approved and made in Italy. Caleffi identifies high-performance tempering valves with a yellow cap. The Caleffi tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe CALEFFI 252219HP tempering valve is ideal for high temperature and high performance hot water systems, including solar hot water systems, instantaneous heaters, and pumped ring main distribution systems. It automatically mixes the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the CALEFFI 252219HP tempering valve can be adjusted between 35-50 deg.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Caleffi\u003c\/li\u003e\n\u003cli\u003eModel: Yellow Cap Solar, 252219HP\u003c\/li\u003e\n\u003cli\u003eThread Size: 3\/4\" (20mm) BSP Male Compression Thread (20C x 20C x 20C) - Olives\/cone nuts not supplied\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 26.441mm external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 100 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 35-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMaximum Unbalanced dynamic supply: 6:1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Systems, Instantaneous Heaters, Heat Pumps, Ring Main Circulation, Standard Hot Water Heaters\u003c\/li\u003e\n\u003cli\u003eSKU: 252219HP\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCALEFFI 252219HP Solar 20mm tempering valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 840g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Caleffi","offers":[{"title":"Default Title","offer_id":39523422535848,"sku":"252219HP","price":223.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250816143700.jpg?v=1755322289"},{"product_id":"reflex-rttv15s-15mm-solar-rated-high-performance-tempering-mix-valve","title":"Reflex RTTV15S 15mm Solar Rated High Performance Tempering Mix Valve","description":"\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOverview\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eReflex RTTV15S solar rated high performance tempering mix valve has BSP 15mm 1\/2\" compression fittings at all three ends and features copper olives. Australian Watermark approved. The Reflex tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Thomson and Nefa with same functions, fitment and similar physical size.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe Reflex RTTV15S solar rated high performance tempering valve can automatically mix the cold and hot water inputs and output a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the Reflex RTTV15S tempering valve can be adjusted between 35-55 deg.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eBeing a solar rated and high performance variant, the Reflex RTTV15S tempering valve can be used in solar hot water heaters and instantaneous gas water heaters where the hot inlet temperature can be very high up to 99 degrees. In these applications, a standard tempering valve cannot handle the high incoming temperature at the hot inlet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eTechnical Details\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: Reflex\u003c\/li\u003e\n\u003cli\u003eModel: RTTV15S\u003c\/li\u003e\n\u003cli\u003eWatermark License Number: WMKA21793\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Compression with Copper Olives (15C x 15C x 15C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body and stainless steel filter mesh\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 35-55 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 15 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1600Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: Loose nuts to allow easy removal of the hot and cold inlets ends for servicing and cleaning\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Heater, Instantaneous Gas, Heat Pump, Standard Hot Water Heater and Storage Gas Water Heater\u003c\/li\u003e\n\u003cli\u003eSKU: RTTV15S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePackage Contents\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReflex RTTV15S Tempering Valve \u003c\/li\u003e\n\u003cli\u003ePackage Weight: 650g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Reflex","offers":[{"title":"Default Title","offer_id":43195778957480,"sku":"RTTV15S","price":60.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250812112129.jpg?v=1754961977"},{"product_id":"reflex-rttv15-15mm-standard-tempering-mix-valve","title":"Reflex RTTV15 15mm Standard Tempering Mix Valve","description":"\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOverview\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eReflex RTTV15 tempering mix valve has BSP 15mm 1\/2\" compression fittings at all three ends and features copper olives. Australian Watermark approved. The Reflex tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Thomson and Nefa with same functions, fitment and similar physical size.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe Reflex RTTV15 tempering valve can automatically mix the cold and hot water inputs and output a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the Reflex RTTV15 tempering valve can be adjusted between 35-55 deg.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe Reflex RTTV15 tempering valve features loose nuts connection on the cold and hot inlets. This allows for easy removal and servicing of the stainless steel mesh filters in the tempering valve's life cycle. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eTechnical Details\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Reflex\u003c\/li\u003e\n\u003cli\u003eModel: RTTV15\u003c\/li\u003e\n\u003cli\u003eWatermark License Number: WMKA21793\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Compression with Copper Olives (15C x 15C x 15C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body and stainless steel filter mesh\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 35-55 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 15 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1600Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: Loose nuts to allow easy removal of the hot and cold inlets ends for servicing and cleaning\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Heater, Instantaneous Gas, Heat Pump, Standard Hot Water Heater and Storage Gas Water Heater\u003c\/li\u003e\n\u003cli\u003eSKU: RTTV15\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePackage Contents\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReflex RTTV15 Tempering Valve \u003c\/li\u003e\n\u003cli\u003ePackage Weight: 650g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Reflex","offers":[{"title":"Default Title","offer_id":43195967504552,"sku":"RTTV15","price":60.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250812105021.jpg?v=1754960263"},{"product_id":"apo-tmv15s-15mm-high-performance-solar-tempering-mix-valve","title":"APO TMV15S 15mm High Performance Solar Tempering Mix Valve","description":"\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOverview\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eAPO TMV15S solar rated high performance tempering mix valve has BSP 15mm 1\/2\" compression fittings at all three ends and features copper olives. Australian Watermark approved. The APO tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eOptional insulation jackets can be included with the APO tempering valve.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe APO TMV15S tempering valve can automatically mix the cold and hot water inputs and output a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the APO TMV15S tempering valve can be adjusted between 35-55 deg.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eBeing a solar rated and high performance variant, the APO TMV15S tempering valve can be used in solar hot water heaters and instantaneous gas water heaters where the hot inlet temperature can be very high up to 99 degrees. In these applications, a standard tempering valve cannot handle the high incoming temperature at the hot inlet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eTechnical Details\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: APO\u003c\/li\u003e\n\u003cli\u003eModel: TMVS15\u003c\/li\u003e\n\u003cli\u003eWatermark License Number: WMK26648\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Compression with Copper Olives (15C x 15C x 15C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body and stainless steel filter mesh\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 35-55 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 15 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1600Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: Loose nuts to allow easy removal of the hot and cold inlets ends for servicing and cleaning\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Heater, Instantaneous Gas, Heat Pump, Standard Hot Water Heater and Storage Gas Water Heater\u003c\/li\u003e\n\u003cli\u003eSKU: APO-TMV15S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePackage Contents\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAPO TMV15S Tempering Valve\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 650g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APO","offers":[{"title":"No Insulation","offer_id":44007243776168,"sku":"APO-TMV15S","price":38.0,"currency_code":"AUD","in_stock":true},{"title":"Inc Insulation","offer_id":44007243743400,"sku":"APO-TMV15S-i","price":42.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250729104241.jpg?v=1753750965"},{"product_id":"apo-universal-tempering-mix-valve-insulation-jacket-for-avg-reliance-tomson-caleffi-aw","title":"APO Universal Tempering Mix Valve Insulation Jacket for AVG Reliance Tomson Caleffi AW","description":"\u003ch4 data-mce-fragment=\"1\"\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #1f2124; font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\" color=\"#1f2124\" face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e\u003cspan\u003eAPO universal tempering mix valve insulation jacket is compatible with all mainstream valve manufacturers such\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color: #1f2124; font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\" color=\"#1f2124\" face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e\u003cspan\u003e as AVG, Reliance Tomson, Caleffi, Reflex, Edison and APO in both 15mm \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e½\" \u003c\/span\u003e\u003cspan style=\"color: #1f2124; font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\" color=\"#1f2124\" face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e\u003cspan\u003eand 20mm \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e¾\" sizes. \u003c\/span\u003e\u003cspan style=\"color: #1f2124; font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\" color=\"#1f2124\" face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e\u003cspan\u003eThese tempering mix valves are fitted to heat pumps, electric, gas storage and solar water heaters across brands including Rheem, Rinnai, Dux, Chromagen, Solarhart, Vulcan, Therman, Apricus and Solahart. Therefore, this APO universal tempering mix valve insulation jacket will replace all the worn out items if the customers have the above branded hot water services or the aforementioned branded valves fitted. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eThe plumbing valve insulation is a requirement by plumbing rules in many Australian states. The APO insulation jacket can reduce the heat loss and improve the hot water services' overall thermal efficiency, while providing a clean and professional finish. The APO insulation jacket is made of self skinned PU polyurethane foam and has anti UV additives. The insulation jack is locked into place by the supplied zip ties. The insulation foam material is very soft and therefore can adapt to differently shaped valves from a wide range of manufacturers. The fitment photos to a few brands' \u003c\/span\u003e\u003cspan style=\"color: #1f2124; font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\" color=\"#1f2124\" face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e\u003cspan\u003e15mm \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e½\" \u003c\/span\u003e\u003cspan style=\"color: #1f2124; font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\" color=\"#1f2124\" face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e\u003cspan\u003eand 20mm \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e¾\" sized valves are shown in the photo gallery. The valves are not included in this listing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTechnical Detail\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: APO\u003c\/li\u003e\n\u003cli\u003eModel: TMV-i\u003c\/li\u003e\n\u003cli\u003e3 zip ties supplied\u003c\/li\u003e\n\u003cli\u003eMaterial: Self skinned PU foam with anti UV additives\u003c\/li\u003e\n\u003cli\u003eSizes: universal fitment to both \u003cspan style=\"color: #1f2124; font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\" color=\"#1f2124\" face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e\u003cspan\u003e15mm \u003c\/span\u003e\u003c\/span\u003e½\" \u003cspan style=\"color: #1f2124; font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\" color=\"#1f2124\" face=\"-apple-system, BlinkMacSystemFont, San Francisco, Segoe UI, Roboto, Helvetica Neue, sans-serif\"\u003e\u003cspan\u003eand 20mm \u003c\/span\u003e\u003c\/span\u003e¾\" tempering mix valves\u003c\/li\u003e\n\u003cli\u003eIntended Use: tempering mix valve insulation\u003c\/li\u003e\n\u003cli\u003eSKU: APO-TMV-i\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\" style=\"padding-left: 30px;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAPO Tempering Mix Valve Universal Insulation Jacket\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePackage Weight: 100g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"text-decoration: underline;\"\u003e\u003cspan data-mce-fragment=\"1\" size=\"4\"\u003ePostage\u003c\/span\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eAll listed items are in stock. Dispatch next business day. Local pick up is available.\u003c\/div\u003e\n\u003c\/div\u003e","brand":"APO","offers":[{"title":"Default Title","offer_id":46699357470888,"sku":"APO-TMV-i","price":8.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/1_c6195dc3-c1be-4505-ad91-5452bb14e160.png?v=1707315759"},{"product_id":"apo-tmvs15-15mm-high-performance-solar-tempering-mix-valve-copy","title":"APO TMV15 15mm Standard Tempering Mix Valve","description":"\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOverview\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eAPO TMV15 standard tempering mix valve has BSP 15mm 1\/2\" compression fittings at all three ends and features copper olives. Australian Watermark approved. The APO tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eOptional insulation jackets can be included with the APO tempering valve.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eThe APO TMV15 tempering valve can automatically mix the cold and hot water inputs and output a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the APO TMV15 tempering valve can be adjusted between 35-55 deg. The APO standard tempering valve is suitable for electric water heaters and heat pumps.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eTechnical Details\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: APO\u003c\/li\u003e\n\u003cli\u003eModel: TMV15\u003c\/li\u003e\n\u003cli\u003eWatermark License Number: WMK26648\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Compression with Copper Olives (15C x 15C x 15C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body and stainless steel filter mesh\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 35-55 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 15 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1600Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: Loose nuts to allow easy removal of the hot and cold inlets ends for servicing and cleaning\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Heater, Instantaneous Gas, Heat Pump, Standard Hot Water Heater and Storage Gas Water Heater\u003c\/li\u003e\n\u003cli\u003eSKU: APO-TMV15\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePackage Contents\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAPO TMV15 Tempering Valve\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 650g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APO","offers":[{"title":"No Insulation","offer_id":53252702732456,"sku":"APO-TMV15","price":38.0,"currency_code":"AUD","in_stock":true},{"title":"Inc Insulation","offer_id":53252702765224,"sku":"APO-TMV15-i","price":42.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250729105219.jpg?v=1753750965"},{"product_id":"apo-tmv20s-20mm-high-performance-solar-tempering-mix-valve","title":"APO TMV20S 20mm High Performance Solar Tempering Mix Valve","description":"\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOverview\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eAPO TMV20S solar rated high performance tempering mix valve has BSP 20mm 3\/4\" compression fittings at all three ends and features copper olives. Australian Watermark approved. The APO tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eThe APO TMV20S tempering valve can automatically mix the cold and hot water inputs and output a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the APO TMV20S tempering valve can be adjusted between 35-55 deg.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eBeing a solar rated and high performance variant, the APO TMV20S tempering valve can be used in solar hot water heaters and instantaneous gas water heaters where the hot inlet temperature can be very high up to 99 degrees. In these applications, a standard tempering valve cannot handle the high incoming temperature at the hot inlet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eTechnical Details\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: APO\u003c\/li\u003e\n\u003cli\u003eModel: TMVS20S\u003c\/li\u003e\n\u003cli\u003eWatermark License Number: WMK26648\u003c\/li\u003e\n\u003cli\u003eThread Size: 3\/4\" (20mm) BSP Compression with Copper Olives (20C x 20C x 20C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 26.441mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body and stainless steel filter mesh\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 35-55 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 15 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1600Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: Loose nuts to allow easy removal of the hot and cold inlets ends for servicing and cleaning\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Heater, Instantaneous Gas, Heat Pump, Standard Hot Water Heater and Storage Gas Water Heater\u003c\/li\u003e\n\u003cli\u003eSKU: APO-TMV20S\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePackage Contents\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAPO TMV20S Tempering Valve With Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 840g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APO","offers":[{"title":"Default Title","offer_id":53254159433896,"sku":"APO-TMV20S","price":69.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250812123412_dad18f1f-a51c-4940-bf7c-4ce84cec6c49.jpg?v=1758074336"},{"product_id":"aw-tv15lf-15mm-standard-tempering-mix-valve","title":"AW TV15LF 15mm Standard Tempering Mix Valve","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eAUSTWORLD (AW) LOGI TV15LF tempering valve has BSP 15mm 1\/2\" compression fittings at all three ends and features copper olives. Australian Watermark approved. The AW TV15 tempering valve is compatible and a direct swap for most mainstream tempering valve brands such as AVG, Reliance, Tomson and Nefa with same functions, fitment and similar physical size.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe AW TV15 tempering valve can automatically mix the cold and hot water inputs and output a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the AW TV15 tempering valve can be adjusted between 40-50 deg.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e Brand: AUSTWORLD (AW)\u003c\/li\u003e\n\u003cli\u003eModel: TV15LF\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Compression with Copper Olives (15C x 15C x 15C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery)\u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body, Chrome Plated\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 40-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 15 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 3.6L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: Loose nuts to allow easy removal of the hot and cold inlet ends for servicing and cleaning\u003c\/li\u003e\n\u003cli\u003eIntended Use: Instantaneous Gas, Heat Pump, Standard Hot Water Heater and Storage Gas Water Heater\u003c\/li\u003e\n\u003cli\u003eSKU: AW-TV15LF\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAW TV15LF Tempering Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 800g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AW","offers":[{"title":"Default Title","offer_id":53254250922152,"sku":"AW-TV15LF","price":63.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250812145300.jpg?v=1754974844"},{"product_id":"aw-tv15hp-15mm-solar-rated-high-performance-tempering-mix-valve","title":"AW TV15HP 15mm Solar Rated High Performance Tempering Mix Valve","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eAUSTWORLD (AW) LOGI TV15HP high performance solar-rated tempering valve has BSP 15mm 1\/2\" compression fittings at all three ends and features copper olives. Australian Watermark approved. The AW TV15HP tempering valve is compatible and a direct swap for most mainstream tempering valve brands such as AVG, Reliance, Tomson and Nefa with same functions, fitment and similar physical size.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eThe AW TV15HP tempering valve is ideal for high temperature and high performance hot water systems, including solar hot water systems, instantaneous heaters, and pumped ring main distribution systems. It automatically mixes the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the AW TV15HP tempering valve can be adjusted between 40-50 deg.\u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: AUSTWORLD (AW)\u003c\/li\u003e\n\u003cli\u003eModel: TV15HP\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Compression with Copper Olives (15C x 15C x 15C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body, Chrome Plated\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 40-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003ePressure Supply Differential: 2:1 Maximum\u003c\/li\u003e\n\u003cli\u003eMaximum Permitted Pressure Variation: ±10%\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 3.6L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Systems, Instantaneous Heaters, Heat Pumps, Ring Main Circulation, Standard Hot Water Heaters\u003c\/li\u003e\n\u003cli\u003eSKU: AW-TV15HP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAW TV15HP Tempering Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 800g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AW","offers":[{"title":"Default Title","offer_id":53254520471720,"sku":"AW-TV15HPLF","price":75.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250812141846.jpg?v=1754972709"},{"product_id":"aw-tv20hp-20mm-solar-rated-high-performance-tempering-mix-valve","title":"AW TV20HP 20mm Solar Rated High Performance Tempering Mix Valve","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eAUSTWORLD (AW) LOGI TV20HP high performance solar-rated tempering valve has BSP 15mm 1\/2\" compression fittings at all three ends and features copper olives. Australian Watermark approved. The AW TV15HP tempering valve is compatible and a direct swap for most mainstream tempering valve brands such as AVG, Reliance, Tomson and Nefa with same functions, fitment and similar physical size.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe AW TV20HP tempering valve is ideal for high temperature and high performance hot water systems, including solar hot water systems, instantaneous heaters, and pumped ring main distribution systems. It automatically mixes the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the AW TV20HP tempering valve can be adjusted between 40-50 deg.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePackage Weight: 800g\u003c\/li\u003e\n\u003cli\u003eBrand: AUSTWORLD (AW)\u003c\/li\u003e\n\u003cli\u003eModel: TV20HP\u003c\/li\u003e\n\u003cli\u003eThread Size: 3\/4\" (20mm) BSP Compression with Copper Olives (20C x 20C x 20C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 26.441 mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery)\u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body, Chrome Plated\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 40-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003ePressure Supply Differential: 2:1 Maximum\u003c\/li\u003e\n\u003cli\u003eMaximum Permitted Pressure Variation: ±10%\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 3.6L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Systems, Instantaneous Heaters, Heat Pumps, Ring Main Circulation, Standard Hot Water Heaters\u003c\/li\u003e\n\u003cli\u003eSKU: AW-TV20HP\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAW TV20HP Tempering Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 900g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"AW","offers":[{"title":"Default Title","offer_id":53254613074088,"sku":"AW-TV20HP","price":87.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250812144833.jpg?v=1754974340"},{"product_id":"apo-tmv20-20mm-standarad-tempering-mix-valve","title":"APO TMV20 20mm Standarad Tempering Mix Valve","description":"\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOverview\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eAPO TMV20 tempering mix valve has BSP 20mm 3\/4\" compression fittings at all three ends and features copper olives. Australian Watermark approved. The APO tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003eThe APO TMV20S tempering valve can automatically mix the cold and hot water inputs and output a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the APO TMV20S tempering valve can be adjusted between 35-55 deg. The APO standard tempering valve is suitable for electric water heaters and heat pumps.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eTechnical Details\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: APO\u003c\/li\u003e\n\u003cli\u003eModel: TMVS20\u003c\/li\u003e\n\u003cli\u003eWatermark License Number: WMK26648\u003c\/li\u003e\n\u003cli\u003eThread Size: 3\/4\" (20mm) BSP Compression with Copper Olives (20C x 20C x 20C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 26.441mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body and stainless steel filter mesh\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 35-55 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 15 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1600Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: Loose nuts to allow easy removal of the hot and cold inlets ends for servicing and cleaning\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Heater, Instantaneous Gas, Heat Pump, Standard Hot Water Heater and Storage Gas Water Heater\u003c\/li\u003e\n\u003cli\u003eSKU: APO-TMV20\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003ePackage Contents\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAPO TMV20 Tempering Valve With Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 840g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APO","offers":[{"title":"Default Title","offer_id":53413144920232,"sku":"APO-TMV20","price":69.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250812123412_dad18f1f-a51c-4940-bf7c-4ce84cec6c49.jpg?v=1758074336"},{"product_id":"caleffi-521319-20mm-standard-tempering-mix-valve","title":"CALEFFI 521319 20mm Standard Tempering Mix Valve","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOverview\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eCALEFFI 521319 standard tempering valve has BSP 20mm 3\/4\" male compression threads at all three ends. Australian Watermark Approved and made in Italy. Caleffi identifies standard tempering valves with a grey cap. The Caleffi tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. \u003c\/p\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eThe CALEFFI 521319 tempering valve can automatically mix the cold and hot water inputs and outputs a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the CALEFFI 521319 tempering valve can be adjusted between 35-50 deg.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Caleffi\u003c\/li\u003e\n\u003cli\u003eModel: Grey Cap Standard, 521319\u003c\/li\u003e\n\u003cli\u003eThread Size: 3\/4\" (20mm) BSP Male Compression Thread (20C x 20C x 20C) - Olives\/cone nuts not supplied\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 26.441mm external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 85 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 35-50 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 50 deg Standard (Must be commissioned on site by installer)\u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS4032.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1400Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003eMaximum Unbalanced dynamic supply: 6:1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Solar Hot Water Systems, Instantaneous Heaters, Heat Pumps, Ring Main Circulation, Standard Hot Water Heaters\u003c\/li\u003e\n\u003cli\u003eSKU: 521319\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCALEFFI 521319 Solar 15mm tempering valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 840g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Caleffi","offers":[{"title":"Default Title","offer_id":53463456186536,"sku":"521319","price":173.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250816143634.jpg?v=1755322285"},{"product_id":"avg-tcv15-15mm-temperature-control-valve","title":"AVG TCV15 15mm Temperature Control Valve (65°C Tempering Mix Valve)","description":"\u003ch4\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan size=\"4\"\u003eOverview\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan size=\"4\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cp style=\"text-align: justify;\" class=\"MsoNormal\"\u003eAVG TCV15 Temperature Control Valve is Australian Watermark Approved and has BSP 15mm 1\/2\" compression fittings at all three ends and features copper olives. The temperature control valve can automatically mix the cold and hot water inputs and outputs a steady 65 deg hot water after mixing as a factory default setting. The output temperature of the temperature control valve can be adjusted between 50-65 deg. If required to be used as a safety valve the TCV must be commissioned on site to no more than 50°C by a licensed plumber as per AS3500. \u003c\/p\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp class=\"MsoNormal\" style=\"text-align: justify;\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eTechnical Details\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Australian Valve Group (AVG)\u003c\/li\u003e\n\u003cli\u003eModel: TCV15\u003c\/li\u003e\n\u003cli\u003eThread Size: 1\/2\" (15mm) BSP Compression with Copper Olives (15C x 15C x 15C)\u003c\/li\u003e\n\u003cli\u003ePhysical Thread Measurement: 20.995mm internal\/external thread diameter (Refer to the BSP sizing chart in the photo gallery) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: DR Brass Body\u003c\/li\u003e\n\u003cli\u003eMaximum Hot Water Supply Temperature: 99 deg\u003c\/li\u003e\n\u003cli\u003eAdjustable Outlet Temperature: 50-65 deg\u003c\/li\u003e\n\u003cli\u003eSet Temperature: 65 deg \u003c\/li\u003e\n\u003cli\u003eAccuracy of Outlet Temperature: \u003cu\u003e+\u003c\/u\u003e3 deg (Tested as per AS13757.2)\u003c\/li\u003e\n\u003cli\u003eMinimum Temperature Differential: 10 deg\u003c\/li\u003e\n\u003cli\u003eMaximum Working Pressure: 1600Kpa (Static) and 500Kpa (Dynamic)\u003c\/li\u003e\n\u003cli\u003ePressure Supply Differential: 2:1 Maximum\u003c\/li\u003e\n\u003cli\u003eMaximum Permitted Pressure Variation: ±10%\u003c\/li\u003e\n\u003cli\u003eMinimum Flow Rate: 4L\/Min\u003c\/li\u003e\n\u003cli\u003eMaximum Flow Rate: 23L\/Min\u003c\/li\u003e\n\u003cli\u003eFeatures: High temperature resistance, tamper-proof adjustment, integrated strainers and check valves, insulation jacket included\u003c\/li\u003e\n\u003cli\u003eIntended Use: Hot water tempering\/mixing applications at 65 degrees\u003c\/li\u003e\n\u003cli\u003eSKU: AVG-TCV15\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAVG TCV15 Temperature Control Valve with Insulation\u003c\/li\u003e\n\u003cli\u003ePackage Weight: 690g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cb\u003e\u003cu\u003e\u003cspan size=\"4\"\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/b\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AVG","offers":[{"title":"Default Title","offer_id":53582204567720,"sku":"AVG-TCV15","price":150.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/files\/Image_20250826135050.jpg?v=1756180308"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0517\/2507\/4600\/collections\/Image_20250812123412_3c7ff83e-05a8-467f-9bb1-926fbba628f3.jpg?v=1755321977","url":"https:\/\/allplumbingonline.com.au\/collections\/tempering-valve.oembed","provider":"All Plumbing Online","version":"1.0","type":"link"}